Power Supply Rejection (PSRR)

A battery powered application can see a change in power supply voltage of several hundreds of milivolts over the life of the product. Moreover, op-amp is also often supplied from noisy lines and must therefore reject the noise adequately. For these reasons, it is important to know how a change or noise on the power supply manifests itself at the output of an op-amp.

It quantifies the amplifier’s sensitivity to power supply changes. Ideally, the power supply rejection ratio should be infinite, which means power supply changes do not affect the output . Typical specifications for a power supply rejection ratio of an amplifier range from 60dB to 100dB.


The picture below shows the MCP601 power supply rejection specification.

© 2017 Microchip Technology, Inc.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.