How does the Block Erase command work on new SST26 flash memory devices(8 KB, 32 KB, 64 KB, Block Erase command)?

The block erase command, depending on the address you give, erases the block where the address is located in memory. Looking at the memory map of the SST26VF064B / SST26VF064BA datasheet, the block that is erased contains the address passed to the command.

For example, if you add an address which is found in a block of 8 Kb, that block of 8 Kb will be erased. If the address corresponds to a block of 64 Kb, the 64 Kb block will be erased.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.