How do you control a BM62/BM64 module via standard HCI?

Start with the BM62/BM64 Evaluation Board and follow the BM62/BM64 EVB user's guide located on the BM62/BM64 landing page.

The UART is be enabled by default, if not, then UART needs to be enabled using the UI tool and programmed into EEPROM. Use the SPKCommandSetTool v160.024.exe file to communicate with the BM62/BM64 over UART. The tool is available on the BM62/BM64 landing page, under Documents >Software> 'IS206x / BM6x Software & Tools. The HCI_TX and HCI_RX pins are available on the BM62/BM64 module and can be connected to any UART RX/TX pins.

The BM62/BM64 EVB user's guides have schematics at the end that can be used as a reference.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.