ENCx24J600 MPLAB® Harmony Driver - Support for IRQ from the PHY to the Micro

Is the IRQ output of the PHY supported into the ENCx24J600 MPLAB® Harmony Driver?

The ENCx24J600 driver does not use the ENC interrupt. This is due to the fact that the driver supports only SPI mode to connect to the PHY and does not yet support a PSP connection (as of MPLAB Harmony version 2.02b). The interrupt will fire too fast to be serviced through SPI.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.