"Link Error: Could not allocate section '_abcdef', because 'ymemory, near' is not a valid combination on this device"

What does this error mean "Link Error: Could not allocate section '_abcdef', because 'ymemory, near' is not a valid combination on this device"?

The error message indicates that the dsPIC® Digital Signal Controller (DSC) Y-memory is outside of the "near" memory range. Refer to the device datasheet "Memory" section to see where the near memory and Y-memory regions are.

The variable/s declared in Y-memory must either use the "far" compiler attribute or the compiler memory model for data must be set for large in the compiler settings. If the device supports Extended Data Space (EDS), the variable/s to be declared in Y-memory may require the EDS attribute.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.