2D Touch - What is the maximum size of the ITO sensor that the DV102014 (MTCH6303) supports?

Could this kit be used to drive a 24 inches touchscreen?

MTCH6303 does not support a 24" touchscreen. The maximum it can support is 10" to 12" depending on performance specifications. The MTCH6303 (on the DV102014) has a maximum of 27 RX and 38 TX channels. The preferred channel width is 5 - 6 mm. Thus, at 6 mm, the biggest size at 16:10 ratio is 10.5 inches. You can stretch the pattern (up to 12'', 14'', etc.) but at a reduction of speed and finger separation (pinch) ability.

MTCH6303 is not recommended for new designs. Visit our 2D Touch page to find out about our latest products.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.