Selecting an Oscillator for MCP2515

We recommend using the same or similar crystal as 'Y1' in the "MCP2515 PICtail™ Plus Daughter Board User's Guide".

From Abracon, part number ABM3B-20.000MHZ-B2-T is used. Make sure to test the setup as described in the MCP2515 datasheet. Under the "Capacitor Selection for Crystal Oscillator" table, Note 4 reads:

"Always verify oscillator performance over the VDD and temperature range that is expected for the application."

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.