Development Tools/Demo Boards - MCP3903 Evaluation Board Connections - Input Voltage Range

Consider the MCP3913 unless the system requires a 5 V rail (3913 is 3 V only).

Some have used an external through-hole resistor, screwed it into one of the terminals on the left-hand side of the board to create a voltage divider of 1000:1 (with the low side of the voltage divider being one of the surface-mount parts on the board). They put the desired voltage (e.g., 210 V) on the resistor (the side not screwed in, which is off the board), then the divider gives a 210 mV AC signal on the board going into the device.

The voltages on the board going directly into the 3903 must be within the limits of the 3903 input range, which is +/-500 mV.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.