How do you choose an Oscillator that satisfies Reference Clock (REFCLK) requirements for Hi-Speed USB 2.0 transceivers?

How do you choose a reference clock for USB3317 that runs at 26 MHz?

For the requirements for REFCLK, please read "Section 5.4.1 Reference Clock Requirements" of the datasheet.

DSC1001 and DSC6000 satisfy the requirements but the latter is slightly less expensive. The DSC6000 part number that you order depends partly on design factors that aren't requirements for USB3317 (package, temperature, etc.,) You will need to use the ClockWorks Configurator to obtain the actual part number. This can be used to select an appropriate part number for an oscillator that will suit your design requirements.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.