PICDEM™ 2 Plus Demonstration Board: Oscillator Assignment

The PICDEM™ 2 Plus Demonstration Board (DM163022a) has two MCU sockets: a 28-pin socket and a 40-pin socket. Pins 9 and 10 of the 28-pin socket are connected to the OSC pins (13 and 14) of the 40-pin socket. (This connection is not described in the schematic but can be tested with an ohm-meter.)

These connections allow you to have a crystal connected across pins 9 and 10 driving the 28-pin part from Y1.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.