Compatibility Between MPLAB® Code Configurator (MCC) v2.xx and v3.xx Configurations

MPLAB® Code Configurator (MCC) v2.xx it is not compatible with MCC v.3.xx since they don't have the same Java extension. To import a project from previous versions of MCC to newer versions (v3.xx), you must to do it manually as there is no tool available to convert v2.xx configurations to v3.xx format.

Manual conversion:

  1. Install both v2.xx and v3.xx plugins.
  2. Open two MPLAB X IDE instances. In one instance open v2.xx project then load v2.xx MCC configuration (double-click on it). In the second instance, create a new project then open MCC v3.xx.
  3. Recreate the project configuration. In v3.xx go through each peripheral and match the v2.xx settings.
  4. Make sure you add all the pins and the pins settings to the Pin Module. Click on Generate to save the configuration.
  5. Replace v3.xx main .c with the v2.xx version and add all other non-MCC files from the original project.
© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.