LAN8810 - Reference Design Schematic Revision 1.1 - CONFIG3 Connection Clarification

In the LAN8810 Reference Design Schematic, the connections for the CONFIG[3..0] are indicated as follows:

  • CONFIG3 - connected to 100_LED/HPD_MODE
  • CONFIG2 - connected to Ground
  • CONFIG1 - connected to Ground
  • CONFIG0 - connected to 100_LED/HPD_MODE
    • This is incorrect. The CONFIG3 pin can only be connected to CPV(2) / 1000_LED or CPV(3) / VDD as specified in the device datasheet.
© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.