Why can't I choose a specific BSP in MPLAB® Harmony Configurator ?

Why can't I choose a specific MPLAB® Harmony Board Support Package (BSP) using the MPLAB® Harmony Configurator (MHC)?

You can select a specific BSP, as long as the device you associated with the project is used on the development board you want to use.

When creating a new MPLAB Harmony project (or later on in the project properties), the appropriate device needs to be selected, otherwise, the corresponding BSPs for that device will not appear in the MPLAB Harmony Configurator Interface.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.