Get Started with PIC32 USB Applications

If you are starting a new PIC32 USB design using the MPLAB® Harmony Framework, we recommend you follow these steps:

  1. Start your USB board design using schematics of an evaluation board. For example, the PIC32MX1/2/5 Starter Kit can be used as a reference. See the User's Guide for the schematic.
  2. Please take care when you choose the oscillator. USB requires specific values and settings. See the microcontroller datasheet for details.
  3. Validate the hardware using an existing functional USB demo from Harmony. USB example projects can be found in this folder:
    • <install-dir>/apps/usb
  4. Create a new application from scratch or adapt an existing demo to your needs.
© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.