What tools do I need to develop PIC® microcontroller applications?

A Typical Development Setup

Most development setups consist of three main components:

  1. A computer running the MPLAB® X Integrated Development Environment
  2. A programmer / debugger such as one of the following:
  3. A target board with your PIC® microcontroller of choice. This could be something like:
    • Your own hardware
    • A Microchip demonstration board
    • A third-party demonstration board
    • A breadboard
This setup enables you to develop code, program a device, and debug your code in-circuit. It provides you with the greatest amount of flexibility in terms of supported devices since the programmer / debugger tools support the entire range of flash-based PIC microcontrollers and several demonstration boards support entire PIC microcontroller families.

Starter Kits and Microsticks

If you are on a budget or want to evaluate a particular device or device family for possible use in an application, Starter Kits and Microsticks provide an economical and convenient means to get the job done. These tools effectively combine the programmer / debugger and the target device and board into a single unit. While some of them provide a means of expansion into a more full development tool chain, they are limited to the target device that comes on the board. However, the target device is usually the "superset" member of a device family, allowing code developed for it to be used on several other similar devices.

Which Programmer / Debugger Is Right For Me?

While the PICkit 3, ICD3 and Real ICE share a common base feature set, they don't all support every debug feature available. The PICkit 3 is the lowest cost member of the programmer /debugger family and supports the basic debugging functions that developers use most of the time. The ICD3 adds some intermediate debugging features to support more complex debugging tasks. The Real ICE is the flagship debugging tool, offering all the features of the other two tools while adding sophisticated trace and log functions as well as the ability to view variable values in real or near real time.

(Clickable Links)







PICkit 3


Real ICE

Trace Data & Program Flow
Runtime Watch *
Software Breakpoints
Break on Address or Data Match
Break on Data Fetch or Write * *
Pass Counter *
Stopwatch * *
WDT Overflow *
Run, Halt
Single Step
Hardware Breakpoints 1 1-3 1-3 1-4 1-6 1-6 1-6
Peripheral Freeze on Halt *

* Does not apply to all members of family

For the latest device information, from the MPLAB X START Page…
Go to the User’s Guide > Release Notes > Device and Feature Support > Hardware Tool Debug Features by Device

© 2017 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.