How do you select which PIC® device to use on the MCP3911 evaluation board?

MCP3911 ADC Evaluation Board for 16-Bit MCUs Part Number: adm00398

The MCP3911 evaluation board can be populated with either of the two PIC® devices—U1 (originally not populated) or U10:U10:

  1. dsPIC33FJ256MC710
    • The dsPIC33FJ256MC710 is to be soldered onto the board at U1.
  2. PIC24J256GA110
    • This is a PIM that can be plugged-in at U10. The MCLR for the dsPIC® Digital Signal Controllers (DSCs) and the PIM are both connected to the same MCLR dsPIC_MCLRlow.

Only one PIC device can be connected at a time. Please reference the MCP3911 schematics in the user's guide which is available to download from the MCP3911 product page under Documents > User Guides.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.