ICD 4 Debugger Options - Program Options

Choose to erase all memory before programming or to merge code.

PROGRAM OPTIONS OPTION CATEGORY

Erase All Before Program Check to erase all memory before programming begins. Unless programming new or already erased devices, it is important to have this box checked. If not checked, the device will not be erased and the program code will be merged with the code already in the device.
Enable Low-Voltage Programming For Programmer Settings only, PIC®12F/16F1xxx devices:
For the LVP configuration bit set to Low-voltage programming enabled, you may program in either high-voltage (default) or low-voltage (enabled here.)
For the LVP configuration bit set to High-voltage on MCLR/VPP must be used for programming. You may only program using high-voltage.
Programming Method Select either Apply VDD before VPP (default) or Apply VPP before VDD.
LED Brightness Setting Select the level of brightness from 1 (darkest) to 10 (brightest).
PGC Configuration Select either none, pull up or pull down. The default is pull down.
PGC resistor value (kΩ) Type in a resistor value from 0-50. The default value is 4.7 kΩ.
PGD Configuration Select either none, pull up, or pull down. The default is pull down.
PGD resistor value (kΩ) Type in a resistor value from 0-50. The default value is 4.7 kΩ.
Program Speed Select either Low, Normal or High. The default is Normal.
© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.