Creating Makefiles Outside of MPLAB® X IDE

MPLAB® X IDE uses the GNU Make to build its projects. This document explains how to re-create the Makefiles for an MPLAB X IDE project outside of the IDE and how to customize Makefile behavior (modify what the Makefiles do, like change the processor or add extra options) without having to regenerate the file. This document describes how to run make on the Makefiles from the command line.

Note: The safest way to have the Makefiles match the values of the project in the IDE is to either regenerate them with the IDE itself or to use the prjMakefilesGenerator utility, explained later. The IDE will recreate the Makefiles for the main configuration in a project when the project is open. However, you might benefit from some other customization steps which modify the Makefiles' behavior once the Makefiles are already created. This document explains those other steps.

© 2017 Microchip Technology, Inc.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.