Debug Header Support Information

Debug headers require specific debug tools to operate with MPLAB® X IDE. Acquire these before purchasing a debug header, in an Processor Extension Pak (PEP). Available PEPs are listed here:

To proceed to setting up emulation header hardware, click this link: Debug Header Hardware Setup.

Contact Customer Support for issues with debug headers.

Tools Support

Debug headers are supported on the following tools:

  • PICkit™ 3 in-circuit debugger
  • MPLAB® ICD 3 in-circuit debugger
  • MPLAB® REAL ICE in-circuit emulator

Note: Not all features are supported on all tools.

Customer Support

Users of Microchip products can receive assistance through several channels:

  • Distributor or Representative
  • Local Sales Office
  • Field Application Engineer (FAE)

Technical Support

Technical support is available through the web site at:
Documentation errors or comments may be sent to: moc.pihcorcim|srorrecod#moc.pihcorcim|srorrecod.

© 2017 Microchip Technology, Inc.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.