MPLAB® PICkit™ 4 Debugger Unit Description

The debugger consists of an internal main board and an external Micro-B USB connector and an 8-pin SIL connector. On the face of the debugger enclosure is an indicator light strip and a push button located under the logo.

Figure: MPLAB PICkit 4 In-Circuit Debugger

pk4_with_callouts.png
  1. Lanyard Connection - An opening through the top and side for a lanyard (not included) to be attached.
  2. Emergency Recovery Button - If needed, this recessed button is used for Recovery Boot Mode.
  3. Micro-B USB Connector - Used to connect the MPLAB® PICkit™ 4 to the computer with the supplied USB cable.
  4. Indicator Light Strip - Displays the operational modes of the MPLAB PICkit 4 in-circuit debugger (see the "MPLAB PICkit 4 Debugger Indicator Light Strip" page for more information).
  5. Button Area - The area in the center of the shield logo is used for the Programmer-To-Go option and for invoking the bootloader mode. See the “How to Invoke the Bootloader Mode” section of the “MPLAB PICkit 4 Debugger Programmer-To-Go” chapter of the "MPLAB PICkit 4 In-Circuit Debugger User's Guide".
  6. Pin 1 Marker - This designates the pin 1 location for proper connector alignment.
  7. Programming Connector - The connector is an 8-pin SIL header (0.100" spacing) that connects to the target device. See "MPLAB PICkit 4 Debugger Connector Pinout" page.
  8. Micro SD Card Slot1 - The microSD card slot supports a large variety of microSD cards with various speed requirements.
© 2019 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.