Trace Interface Kit Components

The kit consists of an adapter board and trace cable. Kit component dimensions and a pin connection diagram for the adapter board are shown below.

Table: Kit Component Dimensions (in Inches)

Component Length Width Height
Adapter Board 0.900" 0.600" 0.6"
Cable 12.0" 0.5" 0.0625"

Figure 1: Adapter Board Diagram

AdapterBoard.jpg

Figure 2: Adapter Board Pin Connection Diagram

AdapterBoardConnections.jpg

Figure 3: Trace Cable Diagram

TraceCable.jpg

Figure 4: Trace Interface Connections with a PIM

TraceCableConnections.jpg
© 2017 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.