Power Breakpoints

Independent of the Power Data mode, you can set power breakpoints.

1

Select Trace and Profiling Category

In the Project Properties window, click the “Real ICE” category and select the “Trace and Profiling” option category.

2

Select and Enter Setup Data

Under the Trace and Profiling option category:

  • Check “Break At or Above Specified Current Level”. This item will look grayed out until you click the checkbox.
  • Enter a power level under “Break Current Level (in milliamps)”.

Figure: Power Breakpoints

PowerBreakpoints.gif

3

Accept Settings

Click Apply if you want to select additional power settings or OK to close the Project Properties window.

© 2017 Microchip Technology, Inc.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.