MPLAB® PM3 - ICSP™ Options

MPLAB® X IDE>Project Properties>PM3 Category

These options apply to programming using ICSP™ hardware.

Selection Description
Low Voltage Program NOTE: Ensure your device supports low voltage programming. See your device data sheet.
• Check to program device using low voltage.
• Uncheck to program device using Vpp voltage.
Power target circuit from PM3. • Check to power your target from MPLAB PM3.
• Uncheck to power your target from its own power supply.
© 2019 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.