How can I remotely configure the RN1723 / RN131 / RN171?

The only way to remotely configure RN1723 / RN171 / RN131 is by doing the following:

  1. Once connected through UART and in command mode, send run web_app. This will put the module in AP mode and broadcast an SSID with WiFly-XXX (it's an open network).
  2. Connect to this network with your laptop or mobile device.
  3. Open the browser and go to 192.168.1.1, which brings up the configuration menu. If you need to go to advanced configuration, please check the 'Advanced settings' checkbox, which brings up the 'terminal' tab.
  4. Using the terminal, send the commands remotely to the WiFly module.
  5. Once done, click on Save & Reboot, which reboots the module with the new configuration.
© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.