How do you perform a firmware update on a product board with the RN42/RN41?

How do you perform a firmware update on a product board with the RN42/RN41? Should you have access/control to some specific RN42/RN41 pins? Can it be performed through Bluetooth® technology?

Unfortunately, there is no way to upgrade the RN42/RN41 module in the field with a firmware version 6.15 or older. Microchip Device Firmware Update (DFU) Utility can be used to perform DFU update over UART on the RN41/42 Bluetooth module starting with firmware version 6.30 onwards. The DFU image files (.dfu) for the new release of the firmware will be provided to update the firmware.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.