dsPIC33/PIC24 - ECAN Transmission Doesn't Work

On the dsPIC33/PIC24, why doesn't the ECAN transmission work even when the transceiver connections are OK? The CAN Tx output (C1TX/C2TX ) is permanently high and the minimum transmission of one bit is not seen on the CAN Tx pin.

This might occur when the CAN Rx input (C1RX/C2RX ) is not in the right state (high). If the RPx pin used for C1RX has an analog function, this pin must be configured as a digital input.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.