RN4678 - Enter Command Mode (CMD) Via GPIO Pin

If the 0x8000 bit in the FEATURE SET BITMAP is set, the RN4678 is set into Fast mode.

In this mode, the command $ is no longer available to put the device into Command mode, rather, the CMD/DATA switch pin defined using the SX command controls the device operation mode (high for Data mode and low for Command mode).

The command SX, , is used to set the functions of the individual pins available on the module. For example, SX,01,0B will assign the command/data switch pin function to pin P05.

Refer to the "RN4678 Bluetooth® Dual Mode Module Command Reference User’s Guide", available on the RN4678 product page, for more information.

© 2018 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.