- Log-in Microchip Employees Only
- Developer Help
- Global
- What's New
Search

SAM9X60 Curiosity Development Board - Comparison

Last modified by Microchip on 2023/11/10 10:59

In this training topic we compare the differences between the SAM9X60 Curiosity Development Board and the SAM9X60-EK Evaluation Kit.

References:

Features	SAM9X60 Curiosity	SAM9X60-EK
Processor	SAM9X60D1G-I/4FB (1Gb SiP)	SAM9X60-V/DWB
Memory	1 Gb DDR2 (SiP) 4 Gb NAND Flash 2 Kb EEPROM	2 Gb DDR2 4 Gb NAND Flash 2 Kb EEPROM 64 Mb QSPI
Disable Boot	Booting from onboard NAND Flash: - Disabled - J4 open - Enabled - J4 closed	Booting from onboard memories: - Disabled - J13 closed - Enabled - J13 open AND NOT SW4 pressed
Power Management	MCP16501	MIC2800, MCP1725
SD Multimedia Card	1 MultiMediaCard (MMC) or Secure Digital (SD) Memory Card slot (J5) 1 microSD Memory Card slot (J3)	1 MultiMediaCard (MMC) or Secure Digital (SD) Memory Card slot (J4)
USB	1 Micro-B connector (J1) 1 stacked Type-A connector (J10)	1 Micro-B connector (J7) 1 stacked Type-A connector (J8)
Ethernet	1 10Base-T/100Base-TX (J6)	1 10Base-T/100Base-TX (J5)
LCD	1 18-bit RGB666 parallel interface (J13) Note: TWI interface port pins: PA30/PA31 (They do not have pull up resistors.)	1 24-bit RGB888 parallel interface (J17) Note: TWI interface port pins: PA0/PA1
CAN	2 peripheral interfaces (J7) (not populated) Selectable by J14/J15	2 peripheral interfaces (J6)
Audio	N/A	1 Class-D Audio Port (J12)
Debug	1 JTAG (J12) (not populated) 1 UART (J11) Selectable by J14/J15	1 JTAG (J23) 1 UART (J24) 1 J-Link OB + CDC (J22)
User Interface	1 RGB LED (D1) 3 Push Buttons	1 RGB LED (LD1) 4 Push Buttons
Expansion	1 mikroBUS socket 1 Raspberry Pi 40-pin connector (not populated)	1 mikroBUS socket 1 Raspberry Pi 40-pin connector
Image Sensor Interface	N/A	Yes
Operating Temperature	-40 to +85 degrees C	0 to +70 degrees C
Power Options	+5 VDC from USB (J1)	+5 VDC from Micro-B USB (J7) +5 VDC from External Power Jack (J1)
J-Link OB+CDC	N/A	micro-B USB (J22)

Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.